Semiconductor Device Fabrication Lab

Photonics, Electronics, Optical Coatings

Prof. Andrew Sarangan
University of Dayton
(937) 229-3190

Lifesize/Zoom Conferencing

Be cautious of trip hazard due to wires while using this system

• Make sure the Lifesize unit is plugged in.
• Make sure the ethernet cable is plugged in.
• Set the video cart to the best position for conferencing.
• Set the second camera tripod for best position for viewing samples/equipment etc.. This is a very expensive camera, so make sure you do not trip or let the tripod fall.
• The audio function on the Lifesize is unreliable. Therefore, use your own cell phone for audio by connecting to zoom separately.
• Hit the Home key on the remote controller.
• Use the arrow keys to highlight the Video Call icon, and press OK
• Press the Green button to backspace. Type in
• Hit Call on the remote control (top left key).
• This will connect you to the zoom patch control, and then it will ask you for the meeting number. Type in the meeting number using remote control, and then press # to finish.
• By default, it should present two side-by-side screens.
• To use the second camera, hit Input key on the remote, and select the second video.
• The Screens key (left of the Input key) will cycle through different layouts.
• Yellow key will show the menu keys.
• Press the Hangup key (top left key) to end the call.
• Replace the microphone on the charger.
• Replace the remote controller to the cart.
• Leave the cart powered on.